| View previous topic :: View next topic |
| Author |
Message |
noman yousaf
Joined: 07 Jan 2016
Posts: 17
Location: pakistan
|
| I2C function for DS1302 RTC with 16f676 |
 Posted: Sat Nov 05, 2016 8:29 pm |
 |
|
I want to use RTC DS1307 with PIC16F676. Is there any library function which can do this?
Please guide me.
Regards
Last edited by noman yousaf on Sat Nov 05, 2016 9:40 pm; edited 1 time in total |
|
 |
PCM programmer
Joined: 06 Sep 2003
Posts: 21708
|
|
| Posted: Sat Nov 05, 2016 9:14 pm |
|
|
Look in your CCS drivers directory:
| Quote: | c:\program files\picc\drivers\ds1302.c
|
Also, it's SPI, not i2c. |
|
|
noman yousaf
Joined: 07 Jan 2016
Posts: 17
Location: pakistan
|
|
| Posted: Sat Nov 05, 2016 9:42 pm |
|
|
| PCM programmer wrote: | Look in your CCS drivers directory:
| Quote: | c:\program files\picc\drivers\ds1302.c
|
Also, it's SPI, not i2c. |
sorry i made a mistake in writing. it was DS1307. |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19549
|
|
| Posted: Sun Nov 06, 2016 3:50 am |
|
|
There have been drivers posted here for this. For example:
<http://www.ccsinfo.com/forum/viewtopic.php?t=23255&highlight=ds1307>
A search will find others. |
|
|
temtronic
Joined: 01 Jul 2010
Posts: 9245
Location: Greensville,Ontario
|
|
| Posted: Sun Nov 06, 2016 9:12 am |
|
|
I've done several products using the DS1307, it's easy to use and keeps great time. Just be sure to install the battery ! I use the 1Hz interrupt to trigger a remote temp/control data product.
Also if you need to store a few variables, the onboard battery backed RAM is great ! Somewhat easier than EEPROM routines as you can just save/read ONE byte not a 'block'.
Jay |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
