CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

Problem using "strncmp"

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
pilar



Joined: 30 Jan 2008
Posts: 197

View user's profile Send private message

Problem using "strncmp"
PostPosted: Thu Jul 13, 2017 8:59 am     Reply with quote

Hi

Hello, I'm trying to compare two char strings using "strncmp", but I can not get it to work properly. Someone could tell me what is my mistake..

Here is my code:

Code:
#include <18F4520.h>
#device PASS_STRINGS=IN_RAM
#fuses HS,NOWDT,NOPROTECT,NOLVP,NOBROWNOUT,NOSTVREN
#use delay(clock=20MHz)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7, ERRORS)// RS232 Estándar

#include <stdlib.h>

#define LED             PIN_D0
#define ON                 output_high
#define OFF                output_low

int const maxLongBuffRX=42;       
char bufferRX[maxLongBuffRX];       
int indBufferRX=0x00;          
char XCommand[maxLongBuffRX];    
char flag_RptaCommand;
int i;

void Add_bufferRX(char c);
void SendATCommand( char *pCommandTX );

#int_rda
void serial_isr() {
  if(kbhit()){
    Add_bufferRX(getc());
  }
   flag_RptaCommand = 1;
}

void Ini_buff_rec(void){
  int i;
  for(i=0;i<maxLongBuffRX;i++){
    bufferRX[i]=0x00;
  }
  indBufferRX=0x00;
}

void Add_bufferRX(char c){
  switch(c){
    case 0x0D:
      break;
    case 0x0A:
      break;
    default:
      bufferRX[indBufferRX++]=c;
  }
}

void SendATCommand( char *pCommandTX, char *pRXCommand ){
char *ptr;

   Ini_buff_rec();
   flag_RptaCommand = 0;

   printf ("%s",pCommandTX);
   putc('\r');
   
   while (   flag_RptaCommand == 0);

   //ptr=strstr(bufferRX,pRXCommand);

   if(strncmp(bufferRX,pRXCommand,strlen(pRXCommand))== 0)
      ON (LED);
   else
      OFF (LED);
}

void main(){

   OFF(LED);
   enable_interrupts(INT_RDA);
   clear_interrupt(INT_RDA);
   enable_interrupts(GLOBAL);

    SendATCommand("AT", "OK");

   delay_ms(200);

while (TRUE);
}
Ttelmah



Joined: 11 Mar 2010
Posts: 19545

View user's profile Send private message

PostPosted: Thu Jul 13, 2017 9:09 am     Reply with quote

There is a basic problem that you don't really want to do the test until you have the entire reply.

Change your interrupt handler:
Code:

#int_rda
void serial_isr() {
  if(kbhit()){
    Add_bufferRX(getc());
  }
}

void Add_bufferRX(char c){
  switch(c){
    case 0x0D:
      bufferRX[indBufferRX++]='\0';
      flag_RptaCommand = TRUE;
      break;
    case 0x0A:
      bufferRX[indBufferRX++]='\0';
      flag_RptaCommand = TRUE;
      break;
    default:
      bufferRX[indBufferRX++]=c;
  }
}


This way the flag to say a command has been received, will only be set when the carriage return after the 'OK' is seen, not after just one character. You also then have a proper null terminated string, which currently you don't have.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group