7 Segment LED Hardware Connections

[Regular Guy]

Here it is.

https://www.futurlec.com/Mini_Seven-Segment.shtml

On the back is a 10 pin female connector.

How do we check with ohmmeter for common ground please?

Thanks!
_________________
PIC Hobbyist

[temtronic]

not really a CCS compiler question, basic electronics101 but....

honestly contact the seller or the manufacturer of the product THEY should have the information !
sometimes they print the pinout on the PCB, though I only see the front of the module
depending on the connector ,with a 3 volt battery and 2 leads you can 'ring out' (locate...) which pins are the segments .
it's a Toshiba 5161A device, download the datasheet, use DVM-ohms(bzr) to see where the display pins go....

now a clever guy WOULD use a PIC connected to all 10 pins, cut code to test all the possibilites, save the results ,then 'decode' which pins are the segments and the cathode.....

jay

[diode_blade]

There is usually the manufacturer's part number on the side or top of the display.
Google this and you should be able to download the datasheet, for that 7 seg display, it will have the pin out.
Dave

Edit:
I see Temtronic has already said that. Note to self Read full post first...