CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
PICSTART Plus Instructions ?

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest_X44
Guest
PICSTART Plus Instructions ?
PostPosted: Wed Apr 21, 2004 7:01 pm     Reply with quote
I have a PICSTART Plus programmer but no manual.
I've never used this programmer.
I have MPLAB 5.11 on my machine.

I need to program a 16f84 but don't have driver for the PICSTART (is this still needed even though my MPLAB shows PICSTART Plus among items in its menu bar?)

I need instructions to successfully program a 16f84.

Anyone who can tell me the simple steps (also configure the PICSTART Plus)?
dyeatman



Joined: 06 Sep 2003
Posts: 1937
Location: Norman, OK

View user's profile Send private message

PIC Start Plus
PostPosted: Wed Apr 21, 2004 8:40 pm     Reply with quote
The drivers for the PICStart are included in the MPLab software. The info on how to install and use (manuals etc) is found here:

http://www.microchip.com/1010/pline/tools/picmicro/program/picstart/index.htm

The Microchip User forum for the PICStart is found here:

http://forum.microchip.com/
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group