View previous topic :: View next topic |
Author |
Message |
wzmat
Joined: 23 Jun 2005 Posts: 4
|
RS485 transceiver for CAN Bus? |
Posted: Mon Jun 27, 2005 4:53 pm |
|
|
When Can Bus is dominant, Can transceiver will assume maxim 80mA. It seems too much for our application because our network only has 3~4 nodes.
Maybe I can use RS485 transceiver to replace Can transceiver, is there anyone can give me some idea? |
|
|
PCM programmer
Joined: 06 Sep 2003 Posts: 21708
|
|
Posted: Mon Jun 27, 2005 6:11 pm |
|
|
I think you need to read about the CAN bus some more.
It's not a clone of RS232. |
|
|
|