Code missing in .LST file

[Thomas Hartmann]

Hello all,

I am missing code ( functions ) in my list file.
I can not set break points in these functions when debugging with MPLAB 5.70.40 and MPLAB-ICD.
Nonetheless the missing functions are somehow executed because I toggle an output there. I can see the LED blinking ...

Questions 1:
What does the compiler do with that "missing" code ?
Can I trust the compiler on that ?
Why can't I set breakpoints ?

Also I see some "funny" behaviour within these functions:
- I call another function read_eeprom( LENGTH_1 )
@ #define LENGTH_1 8
=> inside the function read_eeprom the parameter reads 2, not 8
- I call set_adc_channel( CHAN_MV )
@ #define CHAN_MV 1
=> ADC 0 is read, not ADC 1, as expected

I replaced the defines with hard coded numbers ( read_eeprom( 8 ) and set_adc_channel( 1 ) ) and all works fine.

Questions 2:
Did anyone experience a similar bahviour ?
Why does the compiler sometimes mess up defines ?

Tnx for your replies

:-)
Thomas


Example code from the .LST file:
---------------------------------------------
0000 07453 .................... if( n1ExecuteMeasurement )
0CE0 1F3C 07454 BTFSS 3C.6
0CE1 2CE5 07455 GOTO 4E5
0000 07456 .................... {
0000 07457 .................... n1ExecuteMeasurement = 0;
0CE2 133C 07458 BCF 3C.6
0000 07459 ....................
0000 07460 .................... measureTemp();
0CE3 2A58 07461 GOTO 258
0000 07462 .................... measureMv();
0CE4 2AB5 07463 GOTO 2B5
0000 07464 ....................
-------------------------------------------------

From my .h-File:
--------------------------------------------
#separate void measureTemp(void);
#separate void measureMv(void); --------------------------------------------

From the tree:
� ��measureTemp 1/93 Ram=13
� � ��read_eeprom_data 0/47 Ram=7
� � ��@DIVS1616 1/81 Ram=6
� ��measureMv 1/118 Ram=9
� ��read_eeprom_data 0/47 Ram=7
� ��read_eeprom_data 0/47 Ram=7
� ��setSelftestADCError 0/22 Ram=1
� ��setSelftestADCError 0/22 Ram=1=============================================
___________________________
This message was ported from CCS's old forum
Original Post ID: 144514962

[Tomi]

Seems that your functions are compiled as INLINE regardless of your #separate directive.
Try to separate the compiler directive from function definition:
#separate
void measureTemp(void);

Instead of "#separate void measureTemp(void);"


:=Hello all,
:=
:=I am missing code ( functions ) in my list file.
:=I can not set break points in these functions when debugging with MPLAB 5.70.40 and MPLAB-ICD.
:=Nonetheless the missing functions are somehow executed because I toggle an output there. I can see the LED blinking ...
:=
:=Questions 1:
:=What does the compiler do with that "missing" code ?
:=Can I trust the compiler on that ?
:=Why can't I set breakpoints ?
:=
:=Also I see some "funny" behaviour within these functions:
:=- I call another function read_eeprom( LENGTH_1 )
:= @ #define LENGTH_1 8
:= => inside the function read_eeprom the parameter reads 2, not 8
:=- I call set_adc_channel( CHAN_MV )
:= @ #define CHAN_MV 1
:= => ADC 0 is read, not ADC 1, as expected
:=
:=I replaced the defines with hard coded numbers ( read_eeprom( 8 ) and set_adc_channel( 1 ) ) and all works fine.
:=
:=Questions 2:
:=Did anyone experience a similar bahviour ?
:=Why does the compiler sometimes mess up defines ?
:=
:=Tnx for your replies
:=
:=:-)
:= Thomas
:=
:=
:=Example code from the .LST file:
:=---------------------------------------------
:=0000 07453 .................... if( n1ExecuteMeasurement )
:=0CE0 1F3C 07454 BTFSS 3C.6
:=0CE1 2CE5 07455 GOTO 4E5
:=0000 07456 .................... {
:=0000 07457 .................... n1ExecuteMeasurement = 0;
:=0CE2 133C 07458 BCF 3C.6
:=0000 07459 ....................
:=0000 07460 .................... measureTemp();
:=0CE3 2A58 07461 GOTO 258
:=0000 07462 .................... measureMv();
:=0CE4 2AB5 07463 GOTO 2B5
:=0000 07464 ....................
:=-------------------------------------------------
:=
:=From my .h-File:
:=--------------------------------------------
:=#separate void measureTemp(void);
:=#separate void measureMv(void); --------------------------------------------
:=
:=From the tree:
:= � ��measureTemp 1/93 Ram=13
:= � � ��read_eeprom_data 0/47 Ram=7
:= � � ��@DIVS1616 1/81 Ram=6
:= � ��measureMv 1/118 Ram=9
:= � ��read_eeprom_data 0/47 Ram=7
:= � ��read_eeprom_data 0/47 Ram=7
:= � ��setSelftestADCError 0/22 Ram=1
:= � ��setSelftestADCError 0/22 Ram=1=============================================
___________________________
This message was ported from CCS's old forum
Original Post ID: 144514963