problem with PCWH V4.040 and the ICD-U40 2.14 rev #99

[inservi]

Hello,

I work with XP pro sp2.

With version 4.039, ICD-U40 worked perfectly as well with “PCWH” than with “ICD program interfaces”.
When I installed PCWH V4.040, the first time that I test “ICD interfaces program” that worked well.
After that, I charged PCWH V4.040, launched a compilation, and then, I launched ICD (from the menu of PCWH ide).

Since this moment, the USB connection is stop to worked ( when launch ICD, the dialog box for serial connection appear).
It is then the same problem from “ICD program interfaces” and from PCWH ide.

The only manner that I found to fix the problem is to reinstall PCWH V4.039 and the driver of usb ICD-U40. I make with this test 3 times.

Can you explain how to use PCWH v4.040 and the ICD-U40 ?

Thank-you.

dro.
_________________
in médio virtus

[horkesley]

Hi,

I to have problems with the USB. I receive a message saying 'no response from target' there is nothing wrong with the target, the USB has crashed.

I used to use an old ICD1 and this worked better than the ICD-U40, albeit a little slower. But this does not work with 4.040.

I am also trying to use a Ramtex driver for a LCD display and seem to have a compatibility problem.

CCS say they have no experience/knowledge of Ramtex, Ramtex say they have had discussuions with CCS regarding compatibility.

Meanwhile, my project is falling behind.

Any comment anyone.

HiTech?
_________________
Horkesley Electronics Limited

[inservi]

Hello,

Yes, for summarize, the USB driver is corrupted after the first usage PCWH 4.040.

CCS must absolutely improve its debugging process !

dro
_________________
in médio virtus

[dini]

Try downloading the latest ICDsoftware(V2.79). Also email [email protected] to report issues as this forum is not regularly monitored.

[inservi]

Thank-you dini. I will try that.