View previous topic :: View next topic |
Author |
Message |
bernardmic
Joined: 23 Aug 2007 Posts: 4 Location: Quebec QC Canada
|
Low cost flowcharting software |
Posted: Thu Aug 23, 2007 9:39 pm |
|
|
Any suggestions as for a low cost flowcharting software that will work well with CCS C source code ? |
|
|
bernardmic
Joined: 23 Aug 2007 Posts: 4 Location: Quebec QC Canada
|
|
Posted: Thu Aug 23, 2007 9:42 pm |
|
|
I forgot to mention that there are many flowcharting software products and evaluating them would takes years....
This is why I address you. To take a shortcut and eliminate a few of them.
Regards |
|
|
PCM programmer
Joined: 06 Sep 2003 Posts: 21708
|
|
|
bernardmic
Joined: 23 Aug 2007 Posts: 4 Location: Quebec QC Canada
|
|
Posted: Fri Aug 24, 2007 10:12 am |
|
|
I meant a flowcharting software that can read a C text file and make the flowchart. The thread you send me to is at least 2 years old !!!
Visio does it but it is not low cost. It is extremely expensive.
SmartDraw won't read C source file.
Fatesoft Code to Flowchart is about $200 Canadian. A bit too expensive.
Any more suggestions ? Remember it has to read C source code and make a flowchart. |
|
|
bernardmic
Joined: 23 Aug 2007 Posts: 4 Location: Quebec QC Canada
|
|
Posted: Fri Aug 24, 2007 10:22 am |
|
|
Testing....
trying to understand why I have to cheat time zone to display proper local time..... |
|
|
|