| View previous topic :: View next topic |
| Author |
Message |
stoyanoff
Joined: 20 Jul 2011
Posts: 375
|
| PicKit 3 debugger with ccs compiler?! |
 Posted: Mon Oct 22, 2012 1:00 am |
 |
|
Is it possible to use PicKit 3 debugger with ccs compiler and if it is, how??
Thanks! |
|
 |
bkamen
Joined: 07 Jan 2004
Posts: 1615
Location: Central Illinois, USA
|
|
| Posted: Mon Oct 22, 2012 1:52 am |
|
|
Yes.
You would use the PICkit3 inside MPLAB.
I operate on all Microchip programming tools and have a PICkit2 (icd2, icd3, picstartplus) and they all work under mplab.
From there, the CCS Compiler is just an MPLAB "add on".
-Ben
_________________
Dazed and confused? I don't think so. Just "plain lost" will do. :D |
|
|
stoyanoff
Joined: 20 Jul 2011
Posts: 375
|
|
| Posted: Mon Oct 22, 2012 2:58 am |
|
|
Yes, but there I have a problem! The MPlab says "The PICkit 3 is missing its Device Database. Please reconnect to the PC and try again."
Do you know how to deal with this problem?
Thanks! |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19568
|
|
| Posted: Mon Oct 22, 2012 3:18 am |
|
|
That's a known bug with the Pickit3, and MPLAB. Do a manual upgrade of the Firmware. Programmer settings, firmware. Update to at least PK3FW_012514.jam. Use MPLAB 8, rather than MPLAB X (if you look on the Microchip forums, about problems with the Pickit 3, you will see why I say this....), and it should find it.
Realistically this is an MPLAB problem, not CCS, so if you have any further problems, ask on the Microchip forums.
Best Wishes |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
